|
|
|
DIMMABLE
ELECTRONIC BALLAST CONTROLS
Douglas supplies a Variety of Controls for Electronic Dimming
Ballasts, which dim any Type of Fluorescent Lighting that
utilizes a 0-10V Dimming Signal.
Dimming Ballasts
Controls for dimming fluorescent lighting loads are commonplace
in most types of buildings.
Fluorescent dimming ballasts can be controlled from architectural dimming control systems, manual wall
box dimmers and daylight harvesting systems.
The most common type of dimming ballasts that is used with
fluorescent lighting utilizes a 0-10 volt signal to set the
dimming level. At the lowest setting, the light level output
is as low as 5%. At the highest setting, the light level output
is 100%.
Douglas Ballast Controls
Douglas manufactures and supplies a variety of controls for dimming ballasts the use the 0-10 volt control method.
These products include:
-
Wall Dimmers, for adjusting channels
of up to 50 dimming ballasts from one device. Available
wall control devices include 2 channel or one channel
with ON/OFF control.
Regulating Daylight Sensor, a ceiling-mounted light sensor for regulating dimming ballasts to maintain a constant room light level when ambient light changes. -
Ballast Control Module, an interface module that allows fluorescent dimming ballasts to be
controlled by an ALC3 Dimming Control Station.
-
LonWorks 12- Output Ballast Controller,
a LonWorks-compliant 12-output controller that can control
up to 50 dimming ballasts per output.
Satellite Panel Dimming , an add-on module to provide constant light control for daylight harvesting.
Product Details, Douglas Dimming Ballast Controls:
|
