DOUGLAS
RELAYS
The DOUGLAS 2-WIRE LATCHING RELAY is the Foundation
of the Douglas 2-Wire Lighting Control System
Douglas 2-wire latching relays have several inherent features that are highly suitable for lighting controls.
Designed for Lighting Loads
Lighting loads are the harshest loads and require relay technology suited for the purpose.
Relays or contactors that are not rated for lighting loads will wear out prematurely.
Douglas relays are engineered for all types of lighting loads to give decades of reliable service.
Easy to Wire: Only 1 Control Wire to Connect
All Douglas relays use the same simple 2-wire control method.
One control wire is all that is needed to switch the relay and to monitor the relay's state.
The single control wire permits easy wiring and wiring management.
It is much easier to install and/or trace one control wire rather than a set of control wires.
Latching Relays are Powered ON and Powered OFF
There are a number of benefits derived from this feature:
Once the relay is ON or OFF, it remains in that state and requires no control power to stay ON or OFF.
Thus, should control power be disabled for any reason, the relay will not switch OFF. Many relays can use the same control power source (a transformer).
Thus, wiring is simplified, as relays, switches and control devices can share the same common wire for power The same relay can be easily controlled with several devices:
-wall switches
-sensors
-time-controlled devices
-digital controls
Manual Override Lever and Indicator
A manual switch lever is built into each relay for easy operation at the panel. This is very useful during
the installation phase when switches and controls are not powered or installed.
Douglas 2-Wire HID Relays
Douglas HID Relays are designed for all types of lighting loads including capacitor-corrected ballasted loads.
Ratings:
Voltage: 120, 277, 347*, 480** VAC
Current: 20A
Certifications: UL and CSA
(*CSA only *UL only for 2-pole version)
Douglas HID Relays are pre-assembled into the PWEx
Series of Relay Panels. The PWEx Panels are available
in sizes that can house from 6 to 72 relays.
Douglas 2-Wire KO Mount Relays
Douglas HID Relays are designed for all types of lighting loads and will provide years of reliable service.
Ratings:
Voltage: 120, 277, 347* VAC
Current: 20A
Certifications: UL and CSA
(*CSA only)
KO Mount Relays can be mounted in a junction box or they can be installed into the WEx
Series of Panels. The WEx Panels are available in size that can house from 6 to 72 relays.
Product Details, Douglas Relays:
|
